Steve Schoger

Steve Schoger @steveschoger

Flatten the layers (command + E) and adjust the stroke to your desired radius/width (Rounded/1.5 pixel stroke shown below). TA DA 👏🏻 https://t.co/46PPrmbCU8 — PolitiTweet.org

Steve Schoger @steveschoger

To create the dot button, draw a rectangle and manually adjust the size to 0.01 and give it a stroke. https://t.co/Hk2zhYHZ4n — PolitiTweet.org

Steve Schoger @steveschoger

Double click the shape to make it editable so you can add connecting points. Use the pen tool (P) to manually draw the handle connected to the top. I made it ~3 x 8 pixels. Give the points a 2 pixel corner radius. https://t.co/QxI1q4qHmc — PolitiTweet.org

Steve Schoger @steveschoger

Delete the overlapping lines. https://t.co/8Ng5cNviv3 — PolitiTweet.org

Steve Schoger @steveschoger

Select both shapes and convert them to a centered stroke and flatten them together (command + E). Using the pen tool (P), add 2 points where the shapes intersect (zoom in if the pen isn’t snapping into position). https://t.co/L367LWdMtR — PolitiTweet.org

Steve Schoger @steveschoger

Flatten the shape (command + E) and double click it to make it editable. Select the bottom left and right points and give them a 2 pixel corner radius. https://t.co/gjjRnsPFZS — PolitiTweet.org

Steve Schoger @steveschoger

Using the ellipse tool (O), draw a 96 x 96 pixel circle and align the bottom to the center/bottom of the rectangle. Select both shapes and cut them using the intersect boolean group tool. https://t.co/d0x3t95oVO — PolitiTweet.org

Steve Schoger @steveschoger

Using the rectangle shape tool (R), draw a 16 x 10 pixel rectangle positioned horizontally centered and make the bottom 3 pixels from the bottom of the artboard. https://t.co/Nz2MK6xVns — PolitiTweet.org

Steve Schoger @steveschoger

Flatten the shape (command + E) and double click it to make it editable. Select the top left and right points and give them a 2 pixel corner radius. Select the bottom left and right points and give them a 1 pixel corner radius. https://t.co/wG0LSnRAdn — PolitiTweet.org

Steve Schoger @steveschoger

Using the ellipse tool (O), draw a 48 x 48 pixel circle and align the bottom to the center/bottom of the rectangle. Select both shapes and use the boolean tool to intersect the group. https://t.co/iEFWF0SBZe — PolitiTweet.org

Steve Schoger @steveschoger

Using the ellipse tool (O), draw a 96 x 96 pixel circle and align the top to the center/top of the rectangle. Select both shapes and use the boolean tool to intersect the group. https://t.co/r69QfnoJuJ — PolitiTweet.org

Steve Schoger @steveschoger

In a 24 x 24 pixel artboard, use the rectangle tool (R) to draw a 18 x 10 pixel rectangle positioned horizontally centered and 6 pixels from the top of the artboard. https://t.co/hJmS7HQ30b — PolitiTweet.org

Steve Schoger @steveschoger

How to make a "Briefcase" icon in @figmadesign. 🧵 thread 👇 https://t.co/Jgs0ZxW20A — PolitiTweet.org

Steve Schoger @steveschoger

@pizza0502 @figmadesign Try my best to keep the points in the pixel grid — especially the edges. In some cases it’s not perfect when curved lines intersect but I try not to think about it too hard in that case. — PolitiTweet.org

Steve Schoger @steveschoger

Over 200 free icons available here 👇 https://t.co/txucXx0Sa7 — PolitiTweet.org

Steve Schoger @steveschoger

Flatten the shapes together (command + E). Using the pen tool, add points to where the shapes intersect. Delete the inner lines. Adjust the stroke to your desired width (Rounded/1.5 pixel stroke shown below). TA DA 👏🏻 https://t.co/xbVrxdqVOu — PolitiTweet.org

Steve Schoger @steveschoger

Using the ellipse shape tool (O) draw and 4 x 4 pixel circle with a centered stroke. Position it so it’s vertically centered with the front of the cone shape and pokes out the front a bit. https://t.co/aBA5O5Zvl3 — PolitiTweet.org

Steve Schoger @steveschoger

Flatten the shapes together (command + E). Using the pen tool, add a point to where it intersects at the top right and the bottom left. Delete the lines above these points. Add a 1 pixel corner radius to the bottom of the handle. https://t.co/Wz7XgLNw5r — PolitiTweet.org

Steve Schoger @steveschoger

Delete the bottom and right points of the circle and outline the stroke (shift + command + O). Convert the new fill layer to a centered stoke. https://t.co/drLTQfUNqv — PolitiTweet.org

Steve Schoger @steveschoger

Using the pen tool, add a point to the circle 4 pixels from the bottom of the artboard. https://t.co/Ke9jLTPapF — PolitiTweet.org

Steve Schoger @steveschoger

Using the ellipse shape tool (O) draw and 32 x 32 pixel circle and position it vertically centered with the cone shape and 5 pixels from the left side. Give it a 4 pixel stroke. https://t.co/U4g2etl8gN — PolitiTweet.org

Steve Schoger @steveschoger

Unhide the circle and convert it to a centered stroke. Using the pen tool, add 2 points just outside the cone shape. The cursor should snap to the nearest pixel. Delete the surrounding lines and make the stroke settings to rounded https://t.co/c6CNRGkUDQ — PolitiTweet.org

Steve Schoger @steveschoger

Select both shapes and intersect them using the boolean tool. Flatten the shape and convert it to a stroke. https://t.co/aZcxGjrtHx — PolitiTweet.org

Steve Schoger @steveschoger

Using the ellipse shape tool (O) draw and 48 x 48 pixel circle and position it so it’s vertically centered with the other shape and aligned on the right edge. Duplicate this shape and hide the duplicate in the layers panel. https://t.co/wc4cZUf8f1 — PolitiTweet.org

Steve Schoger @steveschoger

Using the ellipse shape tool (O) draw and 8 x 8 pixel circle and position it so the top and bottom center points meet at the end of the cone shape. Unionize the selection and flatten the shape https://t.co/gs0F3riKgj — PolitiTweet.org

Steve Schoger @steveschoger

Select all 3 shapes and subtract the selection using the boolean tool. Flatten the shape (command + E). https://t.co/YFszZoEWm3 — PolitiTweet.org

Steve Schoger @steveschoger

Using the ellipse tool (O) draw a 48 x 48 pixel circle and position the bottom/center of it on the left side of the rectangle 5 pixels from the top. Duplicate the circle (command + D) and position the top/center of it 5 pixels from the bottom of the rectangle. https://t.co/sgH8QVdOSA — PolitiTweet.org

Steve Schoger @steveschoger

In a 24 x 24 pixel artboard, use the rectangle tool (R) to draw a 13 x 18 pixel rectangle. https://t.co/lBEGly4ss6 — PolitiTweet.org

Steve Schoger @steveschoger

How to make a "Megaphone" icon in @figmadesign. 🧵 thread 👇 https://t.co/CyqzU3r6Ba — PolitiTweet.org

Steve Schoger @steveschoger

@alirtariq Because it was rotated in the previous step you can't adjust the just the width. Flattening it resets the position of the handles but preserves the editable points on the shape. https://t.co/NT2KJHafsN — PolitiTweet.org